Weld Removal Machine
Welding seam residual height removal equipment, using cold cutting processing method, to clean and level the welding seam residual height. It replaces the traditional grinding equipment with high efficiency, good effect, safer and more efficient.
📝 Instructions for Use
- When working, the operator holds the body and the handle with two hands respectively, puts the front end leaning surface against the surface of the workpiece, close to the outer surface of the workpiece, and pushes it slowly and evenly in the clockwise direction along the surface of the workpiece.
- Weld slag residual height removal adjustment: The maximum chamfer size of the product is 30mm width, height 10mm, a single recommended no more than 10 * 5mm.
- Blade replacement: When changing the blade, first unplug the power supply, adjust the plane against the mountain, using a special wrench T20 type, replace the blade.
⚠️ Attention:
- Before use should check whether the knife grain is intact and compressed.
- 30 minutes of continuous work should be stopped to rest for a few minutes to prevent motor burnout.
- Ensure the power supply is unplugged before any repair work.
- Professional electricians should check carbon brushes every month.
- In case of abnormal situations, immediately cut off power and seek professional inspection.
High-power(900W) motors with stainless steel composite wear-resistant cutter heads.
Frequently Asked Questions
Q1: Is the machine easy to operate and install?
A1: Yes, the operation and installation are straightforward. We provide professional technical support to ensure ease of use.
Q2: What shipping methods are available?
A2: You can choose between sea freight or air freight. Costs will be quoted based on the total weight of your order.
Q3: What is the maximum height of weld bead it can remove?
A3: The machine can handle a maximum height of 10mm, with a recommended single pass of no more than 5mm for optimal efficiency.
Q4: How often should I replace the blades?
A4: Blades should be inspected regularly and replaced when the cutting efficiency decreases or if the edges show visible wear.
Q5: Can this machine be used for industrial grades?
A5: Yes, this is an industrial-grade tool designed for high-performance welding seam cleaning and leveling.
Q6: What power source is required?
A6: It requires a standard electric power source of AC 220V, 50/60Hz.
Sandstorm Steel
